收藏本站
?
Using the ISL6406, ISL6426 PWM Controller
Evaluation Boards
Application Note
July 9, 2008
AN1031.1
Introduction
The ISL6406, ISL6426 is a highly efficient, adjustable
frequency, synchronous buck switching regulator optimized
for generating lower voltages for the distributed DC/DC
architecture required for DSP, memory and core
communication processors in Broadband Gateway
applications. The ISL6406 offers an adjustable output
voltage, while the ISL6426 provides a fixed 1.8V output.
The wide programmable switching frequency range of
100kHz to 700kHz allows the use of small surface mount
inductors and capacitors. The device also provides external
frequency synchronization making it an ideal choice for
DC/DC converter applications. This combination of features
and the available miniature packaging enables the design of
a high performance power supply in an extremely small PCB
area, ideal for portable instruments, access devices and
other applications requiring high efficiency.
There are two MOSFET drivers for use in
synchronous-rectified Buck converters. The ISL6406 is
capable of regulating the output voltage while the DC/DC
converter is sinking current. All these features are packaged
in a 16 lead SOIC, a thin shrunk 16 lead TSSOP or a 16 lead
4x4[mm] QFN (MLFP). More complete descriptions of the
ISL6406 can be found in the data sheet [1].
This application note details the use of the ISL6406 in
DC-DC converter applications requiring a tightly regulated,
fixed output voltage. Any low-cost application requiring a
DC/DC converter can benefit from one of the designs
presented in this application note.
ISL6406, ISL6426 Reference Designs
The ISL6406, ISL6426 evaluation board highlights the
operation of the IC in an embedded application. There are
three evaluation boards from which to choose.
TABLE 1. EVALUATION BOARDS
Quick Start Evaluation
The evaluation board is shipped “ready to use” right from the
box. The board accepts a 3.3V input from a standard power
supply. The output can be exercised through the use of an
external load.
There are posts available on the board for introducing power
to the board and for drawing current from the regulated
output. Two probe points are also available, which provide
kelvin connections to CPVOUT (TP1) and CT1 (P6).
The SYNC/EN pin may be probed from P5.
Recommended Test Equipment
- An adjustable 0V to 5V, 5A capable bench power supply
- An electronic load
- Four channel oscilloscope with probes
- Precision digital multimeter
Power and Load Connections
There are 2 sets of terminals that are used for supplying the
input voltage and loading the output.
Input Voltage - Connect the positive lead of the adjustable
bench power supply to the 3.3V post (P1). Connect the
ground lead of the supply to the GND post (P2).
Output Loading, Sourcing Current - Connect the positive
terminal of the electronic load to the VOUT post (P3).
Connect the return terminal of the same load to the GND
post (P4).
Start-up
There are two distinct start-up methods for the ISL6406
regulator. The first method is invoked through the application
of power to the IC. The soft-start feature allows for a
controlled turn-on of the output once the Power On Reset
(POR) threshold of the input voltage has been reached.
Figure 1 (on the next page) shows the start-up profile of the
BOARD NAME
ISL6406EVAL1
ISL6406EVAL2
ISL6406EVAL3
IC
ISL6406/26CV
ISL6406/26CR
ISL6406/26CB
PACKAGE
16 Ld TSSOP
16 Ld QFN
16 Ld SOIC
regulator in relation to the start-up of the 3.3V input supply
and the bias supply generated by the charge pump.
The second method of start-up is through the use of the
Enable/Shutdown feature. Holding the SYNC/EN pin on the
ISL6406, ISL6426 below 0.8V will disable the regulator by
All evaluation boards have the same output filter,
compensation components and MOSFETs. They are
configured for an output of 2.5V with a maximum load of 5A.
The evaluation board is built with the ISL6406 and is shipped
with ISL6426 samples. Evaluation of the ISL6426 may be
performed by replacing the ISL6406.
forcing both the upper and lower MOSFETs off. Releasing
the pin allows the regulator to start up.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EEC25DREN CONN EDGECARD 50POS .100 EYELET
A9BAA-1505F FLEX CABLE - AFF15A/AF15/AFE15T
695D225X0025D2T CAP TANT 2.2UF 25V 20% 1810
695D156X9010D2T CAP TANT 15UF 10V 10% 1810
A9CAA-0605E FLEX CABLE - AFK06A/AE06/AFH06T
695D156X0010D2T CAP TANT 15UF 10V 20% 1810
TARS475K025 CAP TANT 4.7UF 25V 10% AXIAL
ESC05DRTI CONN EDGECARD 10POS DIP .100 SLD
相关代理商/技术参数
ISL6406EVAL3 功能描述:EVALUATION BOARD 3 ISL6406 RoHS:否 类别:编程器，开发系统 >> 评估板 - DC/DC 与 AC/DC（离线）SMPS 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:True Shutdown™ 主要目的:DC/DC，步升 输出及类型:1，非隔离 功率 - 输出:- 输出电压:- 电流 - 输出:1A 输入电压:2.5 V ~ 5.5 V 稳压器拓扑结构:升压 频率 - 开关:3MHz 板类型:完全填充 已供物品:板 已用 IC / 零件:MAX8969
ISL6406IB 功能描述:IC REG CTRLR BUCK PWM VM 16-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:- 标准包装:4,000 系列:- PWM 型:电压模式 输出数:1 频率 - 最大:1.5MHz 占空比:66.7% 电源电压:4.75 V ~ 5.25 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 85°C 封装/外壳:40-VFQFN 裸露焊盘 包装:带卷 (TR)
ISL6406IB-T 功能描述:IC REG CTRLR BUCK PWM VM 16-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:- 标准包装:4,000 系列:- PWM 型:电压模式 输出数:1 频率 - 最大:1.5MHz 占空比:66.7% 电源电压:4.75 V ~ 5.25 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 85°C 封装/外壳:40-VFQFN 裸露焊盘 包装:带卷 (TR)
ISL6406IBZ 功能描述:IC REG CTRLR BUCK PWM VM 16-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- PWM 型:电流模式 输出数:1 频率 - 最大:275kHz 占空比:50% 电源电压:18 V ~ 110 V 降压:无 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:是 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR)
ISL6406IBZ-T 功能描述:IC REG CTRLR BUCK PWM VM 16-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- PWM 型:电流模式 输出数:1 频率 - 最大:275kHz 占空比:50% 电源电压:18 V ~ 110 V 降压:无 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:是 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR)
ISL6406IR 功能描述:IC REG CTRLR BUCK PWM VM 16-QFN RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:- 标准包装:4,000 系列:- PWM 型:电压模式 输出数:1 频率 - 最大:1.5MHz 占空比:66.7% 电源电压:4.75 V ~ 5.25 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 85°C 封装/外壳:40-VFQFN 裸露焊盘 包装:带卷 (TR)
ISL6406IR-T 功能描述:IC REG CTRLR BUCK PWM VM 16-QFN RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:- 标准包装:4,000 系列:- PWM 型:电压模式 输出数:1 频率 - 最大:1.5MHz 占空比:66.7% 电源电压:4.75 V ~ 5.25 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 85°C 封装/外壳:40-VFQFN 裸露焊盘 包装:带卷 (TR)
ISL6406IRZ 功能描述:IC REG CTRLR BUCK PWM VM 16-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- PWM 型:电流模式 输出数:1 频率 - 最大:275kHz 占空比:50% 电源电压:18 V ~ 110 V 降压:无 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:是 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR)